Oxygenerator
Product Information
| Oxygen concentration |
0.5-5L/min 93%(±3%) |
| Display control |
HD LCD touch screen |
| Rated voltage |
AC220 ± 22V ( or 110V) |
| Control distance |
10 meters infrared remote control |
| Operating noise |
≤55dB(A) |
| Oxygen generation method |
Pressure Swing Adsorption(PSA) |
| Size |
627 x 380 x 240mm |
| Oxygen output |
1L-5L adjustable |
| Input power |
<330W |
Physical principles
Based on the adsorption performance of molecular sieve and the physical principle, the nitrogen in the air is separated from the oxygen by using the large displacement oil-free compressor as the power, and finally the high concentration of oxygen is obtained. This type of oxygen generator produces oxygen rapidly and has high oxygen concentration, which is suitable for oxygen therapy and health care of all kinds of people. The power consumption is low, the cost of an hour is only 18 cents, and the use price is low.
Technical features
It is characterized by the direct increase of arterial oxygen content by oxygen inhalation, rather than the indirect improvement of hypoxia by acting on a certain part of the body. It only increases the oxygen that the body has been taking in all its life. There are no unfamiliar, adaptive and analytical substances for the body, so it is only to improve rather than change the body's natural physiological state and biochemical environment. Low flow oxygen therapy and oxygen health care do not need special guidance, the effect is fast and sure, beneficial and harmless, oxygen therapy can relieve the symptoms of hypoxia in time, but it has only partial and gradual effect on eliminating the causes of hypoxia. Oxygen therapy is the main method to correct physiological hypoxia and environmental hypoxia, and to prevent and treat diseases caused by environmental hypoxia. Oxygen therapy is an important auxiliary method to correct pathological hypoxia. For emergency rescue, oxygen therapy is one of the important means.
Operation method
1. The main engine should be installed in floor type or hanging on the wall, and the gas filter should be installed;
2. Nail the oxygen supply gusset plate on the wall or support as required, and then hang the oxygen supply;
3. Connect the oxygen outlet of the oxygen supply with the oxygen delivery pipe, and connect the 12V power line of the oxygen supply with the 12V power line of the host. If multiple oxygen feeders are connected in series, it is only necessary to add a tee joint to fix the pipeline with a buckle;
4. Plug the 220 V power cord of the host into the wall socket, and the red light of the oxygen supply is on;
5. Please add pure water to the designated position in the humidification cup. And then it is installed on the oxygen outlet of the oxygen supply device;
6. Please put the oxygen delivery pipe on the oxygen outlet of the humidification cup;
7. Press the start button of the oxygen supply, the green indicator light will be on, and the oxygen generator will start to work;
8. Adjust the flow to the required position according to the doctor's advice;
9. Hang up the nasal intubation tube or wear the mask for oxygen inhalation according to the packing instructions of the oxygen mask or nasal suction tube.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}